Maybe the installation expense of a new boiler system is expensive but fortunately, its maintenance cost isn’t! When it comes to the maintenance of the boiler system you can prefer DIY to a limited extent only.
There is some complicated checking which must be left for the professional for their skilled technical assistance. Assistance is there with its dual option- boiler cover plan or one-time servicing and you have to choose the one as per your boiler’s requirements.
6 tips to ensure easy and proper boiler maintenance
Boiler maintenance commences with you because being the homeowner you have the utmost responsibility to keep it in the right and good working conditions. Several things are there you can do on your own for ensuring its efficacy in the long run. 6 tips are shared here for your reference. Let’s have a look at them.
1. Exam the pilot light
The very first thing you can do to check the system’s efficiency is its pilot light. If it lights in the blue strong flame then the system is in perfect condition and there is nothing to worry about! However, in case the flame turns yellow or orange, then it is the warning sign that there is something wrong happening inside if the boiler.
It represents the incomplete combustion which means there may be carbon monoxide (CO) leakage. As a result, it can be a dangerous safety hazard for your family. As the smoky flame also depicts the same picture, you must hire the boiler repair engineer in London to fix it as soon as possible.
2. Influence the water pressure evenly
The central heating system along with the boiler system loses its water pressure gradually over time. At that time, it needs the appropriate adjustment in the pressure gauge- neither too low nor too high. Too low pressure cannot heat up the water as well as the room. On the other hand, too high pressure results in excessive strain on the boiler equipment and pipes.
Hence, you must perform the inspection to the pressure gauge more often. The bar must be within 1-1.5. If it drops down the bar then topping up is essential and vice-versa. Follow the instruction manual to adjust the gauge perfectly otherwise, seek assistance from a trustworthy heating engineer.
3. Clean its surrounding area
Sufficient ventilation is required for the optimal performance of the boiler system. If you have installed it in the kitchen, utility room and inside the cupboard, you must keep the surrounding area clutter-free. Similarly, you have to ensure a clutter-free area for the flue pipe at the same time.
Moreover, you have to entertain additional maintenance to keep them in the right condition for a long period of time. Apart from ventilation, boiler system must be installed in such a space where you can get easy access. Therefore, even at the time of any emergency, your reliable Gas Safe certified engineer can access it to restore its functional ability without being hassled.
4. Lagging of the pipes
During the cold winter months, the probability of the frozen pipes gets increased to a great extent. And once it happens, it will diminish the efficacy of the heating of your boiler system. Even it will lead to the development of blockage that will exert additional pressure and strain on the pipes. As a result, it may end up with either complete breakdown or leakage.
To prevent your pipes from getting frozen, you must lag them. Basically it is a specific kind of insulation made up of polyethylene, foam, glass wool or mineral used for wrapping the piping system to protect them from the freezing temperature. These are the easiest and most inexpensive installation you can take for the proper protection of your home’s piping system.
5. Home must be sealed entirely
If you want the consistent and efficient performance of your boiler in the long run then, you have to insulate your home entirely by ensuring that there are no holes and gaps left to be covered. You will find that your boiler warms up your room within the shortest time and provides you the utmost comfort and coziness.
To seal up the letterbox, keyholes, doors and windows you must install the draught excluders. The vulnerable spots like loft and chimney flue must be closed with the excluders too. In the meantime, if you find any windows and doors in poor condition, it will better to substitute them with an all-new one.
To boost the heat-retaining capacity of your home especially in winter you may install additional insulation at the same time.
6. Book the annual maintenance service
At last, you must perform the checking of the boiler system by scheduling the annual maintenance service. Though, DIY is there to take proper care of the system yet annual boiler maintenance service is most essential as well as it is also very important, if your refrigerator is not working properly then you must ask a professional to repair it. For this, you must hire a reliable professional as only they possess the expertise and make use of the right tools.
During the annual boiler servicing, certified engineers will examine the system extensively. They will assure you about its smooth operation by performing the necessary replacement, repair and cleaning. Moreover, they have the knowledge to locate the issue in the hard-to-access areas easily.
So, it can be repaired immediately to make the system normal again. Also for keeping the validity of the warranty card, sometimes you have to entertain the maintenance service annually. Being a legal issue, it possesses a safety and economic issues as well.
Now, it is time to hire your trusted emergency plumber to perform the servicing of the boiler. But have you ever thought how can you find a trustworthy one in your locality?
Look for the multiple plumbing companies which offer boiler maintenance service too. Then, ask for the quote request to know about the service in detail along with its expense. You can definitely find the one with quality service for your boiler.
